GPA 5510 Progress

Discussions & announcements

Moderator: bobassel

Post Reply
Steve Barber
Posts: 21
Joined: Thu Sep 06, 2007 4:56 pm
Contact:

GPA 5510 Progress

Post by Steve Barber »

Here is an update on GPA 5510. This past weekend I borrowed a gantry crane and lowered the frame into my tub. This process went as smooth as silk and I would recommend it to others. Installing the engine/transmission assembly onto the frame makes access to the left front axle bump stop difficult to install but It save a lot more labor by doing as much as possible outside the frame so you don't have to climb in and out of the tub to get a wrench or some other bit. Hopefully, here are some shots of my progress. The first shots are at the Georgia MVPA show. My frame is sitting beside Tony C.s pristine GPA. This generated a lot of interest since you could see a completed GPA and what makes it tick.
http://www2.snapfish.com/slideshow/Albu ... =157436755
Hopefully the axles will go under the tub this coming weekend.

-Steve
Donovan
Posts: 221
Joined: Tue Dec 13, 2005 6:00 pm
Contact:

Re: GPA 5510 Progress

Post by Donovan »

Steve,

I do not see any of the images you posted!

Donovan.
GPA 11374
Steve Barber
Posts: 21
Joined: Thu Sep 06, 2007 4:56 pm
Contact:

Re: GPA 5510 Progress

Post by Steve Barber »

Let me give it another try!
acmack
Posts: 133
Joined: Wed Feb 08, 2006 1:31 am
Contact:

Re: GPA 5510 Progress

Post by acmack »

Lookin' forward to seeing those photos as well! David
GPA 9545
GPA 10568
1965 Apollo BP capsule A36
1960 Gemini BP capsule MSC 312
Mithril
Posts: 245
Joined: Tue Dec 13, 2005 10:50 pm
Contact:

Re: GPA 5510 Progress

Post by Mithril »

What's new about these pictures and GPA ?
Mithril
1943 Ford GPA #7177 (SOLD)
1945 Ford GPW #267061
1944 Bantam T-3 #48593
http://www.surfacezero.com/g503/showgal ... me=mithril
http://homeusers.brutele.be/mithril
Steve Barber
Posts: 21
Joined: Thu Sep 06, 2007 4:56 pm
Contact:

Re: GPA 5510 Progress

Post by Steve Barber »

Apologies to the group. I lost my password and had difficulty getting back in. First of all GPA 5510 is 99.999% complete. Like a house, I don't know if they are ever 100% finished. About six months ago, my daughter Deborah told me that she wanted to leave her wedding in the GPA. That gave me a lot of motivation to finish my seven year (on and off) restoration effort. I made the April 24, 2010 deadline and everything went well at the wedding. Deborah married a Marine F-18 pilot so I chose to restore my GPA as a USMC vehicle. It was a military wedding so the GPA was a huge hit. I still have a few things to do before it is show ready, but nobody but a GPA expert would notice these issues. Two weekends ago, I swam the GPA for an hour and a half and it did great. I suspect that this was the first time that GPA 5510 has swam in a completed state in 40 years. I was very anal about seam sealing the tub and the GPA never took on enough water to operate the bilge pump! I also used two large plastic cable ties around the drag link boot instead of a clamp. I tightened these ties so that the drag link will still slide in the boot with minimal water leakage. I use wheel bearing grease on the drag link to prevent wear on the boot. I also used a smalll air horn compressor that has a two liter tank to pressurize the axles. I bought a very good regulator fom Eastwood automotive and pressurize my axles to 4 PSI before swimming. So far, the axles have remained free of water contamination.

I still have a few things to tweak. My light switch is wired incorrectly so I need to figure that out. I need to make the wooden panels below the battery trays. I also need to make metal battery covers that go on top of the batterys. I am planning on making a wooden cover for my compressor and mount it on one of the wooden pieces that goes below the port battery. I am going to stencil something like "canned meat" on the box so that it appears to something stored in the battery box area.

Again, apologies to the group for no pictures. I use a computer all day long so I am not very enthusiastic about learning how to post pictures. I have been spending all ofmy spare time on the GPA! Maybe now I can spend a little time to learn how to properly post pictures. I have documented many steps so these pictures will possibly help others in the future.
http://www2.snapfish.com/slideshow/Albu ... =157436755
Mithril
Posts: 245
Joined: Tue Dec 13, 2005 10:50 pm
Contact:

Re: GPA 5510 Progress

Post by Mithril »

Great newsSteve. Congratulations to you for your restauration job (and to your daughter too ... for her wedding).

Be sure someone here can post pictures for you on this forum.
Mithril
1943 Ford GPA #7177 (SOLD)
1945 Ford GPW #267061
1944 Bantam T-3 #48593
http://www.surfacezero.com/g503/showgal ... me=mithril
http://homeusers.brutele.be/mithril
fordgpa
Site Admin
Site Admin
Posts: 192
Joined: Mon Dec 12, 2005 8:08 pm
Contact:

Re: GPA 5510 Progress

Post by fordgpa »

Steve, can you put them on photobucket ??

Then it is easy for me to post them for you


Peter.

BTW Leo Verhagen is also moderator for this forum and this year he is gone take over most of it. sunny
Cees
Posts: 194
Joined: Tue Dec 13, 2005 8:50 am
Contact:

Re: GPA 5510 Progress

Post by Cees »

Steve Barber wrote: I need to make the wooden panels below the battery trays.
I try to make the drawings in Auto cad (DWG) and put them on my site anybody can download them and go to a wood company with a CNC machine to make them but give me some time. idea

Cees
1941 Ford GP,
1943 Ford GPA #6849,
1943 Ford GPA # 7741,
1943 Harley WLC,
Dodge WC57,
1942 BMW R75,
1942 KS750,
1944 VW 166,
1940 Hanomag 20b,

http://www.filmprops.nl/produkten/fordgpa.htm
GlennV
Posts: 92
Joined: Tue Dec 13, 2005 11:26 am
Contact:

Re: GPA 5510 Progress

Post by GlennV »

Hi Cees,

if you need any help with the CAD drawings just send me the sketches and i'll make the drawings for you !

Best regards,
Glenn
Ford GPA - SN 5892 - DOD Jan 14 1943
Willys MB - SN 456307 - DOD July 30 1945
Cees
Posts: 194
Joined: Tue Dec 13, 2005 8:50 am
Contact:

Re: GPA 5510 Progress

Post by Cees »

Glenn,

PM send

Cees
1941 Ford GP,
1943 Ford GPA #6849,
1943 Ford GPA # 7741,
1943 Harley WLC,
Dodge WC57,
1942 BMW R75,
1942 KS750,
1944 VW 166,
1940 Hanomag 20b,

http://www.filmprops.nl/produkten/fordgpa.htm
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest